Toshiba B-SX5 Series - Parameter Setting; Parameter Setting Operation Example

- 8 -
5.7 PARAMETER SETTING
5.7.1 Parameter Setting Operation Example
O N L I N E
B - S X 4 T V 1 . 0 A
P A U S E 5 2
B - S X 4 T V 1 . 0 A
< 1 > R E S E T
< 2 > P A R A M E T E R S E T
< 2 > P A R A M E T E R S E T
F O N T C O D E P C - 8 5 0
< 2 > P A R A M E T E R S E T
Z E R O F O N T 0
< 2 > P A R A M E T E R S E T
S P E E D 9 6 0 0 b p s
< 2 > P A R A M E T E R S E T
D A T A L E N G . 8 b i t s
< 2 > P A R A M E T E R S E T
S T O P B I T 1 b i t
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
(13) Communication speed selection:
Select the communication speed using
the [FEED] and [RESTART] keys.
(11) Font 0 selection:
Select the font using the [FEED] and
[RESTART] keys.
(15) Data length selection:
Select the data length using the [FEED]
and [RESTART] keys.
[PAUSE]
[RESTART]
[FEED]
[PAUSE]
(16) Press the [PAUSE] key.
(12) Press the [PAUSE] key.
(14) Press the [PAUSE] key.
(10) Press the [PAUSE] key.
(7) System mode menu display
(Parameter setting)
(9) Character code selection:
Select the character code using the
[FEED] and [RESTART] keys.
(6) Press the [FEED] key.
(5) The reset menu is displayed.
(4) Hold down the [RESTART] key for 3
seconds or more while the printer is in
a pause state.
(8) Press the [PAUSE] key.
(2) Press the [PAUSE] key.
(3) “PAUSE” is displayed.
(1) Idling or printing normally
Power ON
[PAUSE]
(17) Stop bit length selection:
Select the stop bit length using the
[FEED] and [RESTART] keys.
(18) Press the [PAUSE] key.