3 Tests and Diagnostics 3.21 ONLY ONE TEST
OK message appears in the display if the test ends without a defective.
NG message appears in the display if a defective is found during the test.
Confirm the connection of cable, then execute the test again.
Press 9 and return to ONLY ONE TESST menu.
Subtest 06 Touch Pad (Scroll Button)
This subtest checks if the scroll button of touch pad works properly.
The following message appears in the display.
****** Scroll button TEST (VX.XX) ******
Press Scroll button
Up Button OFF
Down Button OFF
Press [ESC] key to EXIT
Check the message changes OFF<->ON while pressing UP or DOWN button
of scroll button.
Press ESC and return to ONLY ONE TESST menu.
Subtest 07 LED
This subtest checks if each LED lights properly.
The following message appears in the display in order. Follow the instructions
in the display to execute the test.
[HDD Access LED test]
Confirm the LED of HDD status blinks properly.
Press any key and following message appears in the display.
[Caps/Num/Overlay BT/W-LAN LED test]
QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL] 3-53
To Next Page
Loading...
Need help?
General