4 Replacement Procedures 4.8 Bottom cover assembly
9. Turn over the computer upside down.
10. Disconnect the speaker cable (L) from the connector CN6002 under the insulator of
HDD-2 slot.
11. Disconnect the AV-IN harness from the connector CN5660 in the memory module
slot.
AV-IN harness
CN5660
CN6002
Speaker cable (R)
Figure 4-12 Disconnecting the cables
12. Remove the following screws securing the bottom cover assembly.
 M2.0x4.0B BIND screw x1 (Described as "4 or LH"
or in the figure)
M2.0x4.0B LH STICK screw x1
 M2.5x6.0B FLAT BIND screw x3 (Described as "6" in the figure)
 M2.5x8.0B FLAT BIND screw x9 (Described as "8" in the figure)
 M2.5x16.0B FLAT BIND screw x6 (Described as "16" in the figure)
QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL] 4-25
To Next Page
Loading...
Need help?
General