4.35 Wireless antennas 4 Replacement Procedures
Installing the wireless antennas
The following describes the procedure for installing the wireless antennas (See Figure
4-53 and 4-54).
1. Stick the wireless LAN antennas and bluetooth antenna on the display rear cover.
2. Arrange the wireless LAN antenna cables and bluetooth antenna cable on the display
rear cover and fix them with acetate tapes.
3. Installing the hinge front cap (R) while hooking the tabs, install the hinge rear cap
(R) and secure them with the following screw.
 M2.0x4.0B FLAT BIND screw x1
4-84 [CONFIDENTIAL] QOSMIO G20 Maintenance Manual (960-511)
To Next Page
Loading...
Need help?
General