3.21 ONLY ONE TEST 3 Tests and Diagnostics
QOSMIO G30 Maintenance Manual (960-546) [CONFIDENTIAL] 3-53
Confirm each LED lights properly.
(1) Press [Caps Lock ] key ! ...Caps (on/off)
(2) Press [Fn + F10 ] key ! ...Arrow (on/off)
(3) Press [Fn + F11 ] key ! ...Num (on/off)
(4) Slide [BT/W-LAN switch L&R]! (on/off)
Press Enter and following message appears in the display.
Check [PowerSW-LED]= Green
Check if the Power Switch LED lights in the following order.
(Green -> Orange -> Blue -> OFF)
Press any key and following message appears in the display.
Check [DC-IN]&[Power]&[Main Battery]LED= Green
Check if the each LED lights in the same color as the message in the display
(Message switches Green <-> Orange ).
Press Enter and return to the ONLY ONE TEST menu.
To Next Page
Loading...
