Toshiba Qosmio G30 - Sound Test Program; Sound (Standard) Test; Sound (Legacy) Test

3.30 Sound Test program 3 Tests and Diagnostics
QOSMIO G30 Maintenance Manual (960-546) [CONFIDENTIAL] 3-89
3 Tests and Dia tics
3.30 Sound Test program
gnos
This section describes how to perform the Sound test. To execute the sound test, refer to the
following description.
Prepare a HDD and format it on DOS. Copy all files in the floppy disk in which the Sound
test program is stored to the HDD. Reboot the computer from the HDD. The following
message will appear:
################################################################
###### WSS, Sound blaster pro Diagnostics program ######
################################################################
* *
* 1 ............ Sound (Standard) *
* *
* 2 ............ Sound (Legacy) *
* *
* 3 ............ CD Sound (Standard) *
* *
* 4 ............ CD Sound (Legacy) *
* *
* ---It outputs at the speaker and lineout--- *
* *
****************************************************************
.... Press test number[1-4] ?
Input the test number and press Enter.
3.30.1 Sound (Standard)
To execute the Sound (Standard) test, press 1 and Enter. The following menu will appear in
the display.
################################################################
###### ICH4-M + AD1981A Diagnostics program ######
################################################################
* *
* 1 ............ (Microphone recording & play) *
* 2 ............ (Sine wave) *
* 3 ............ (Line IN recording & play) *
* *
* 9 ............ Exit to Main *
* *
****************************************************************
.... Press test number[1-3, 9] ?