Appendix J   Maintenance of TOSHIBA RAID  Appendices 
Appendix J    
Appendix J  Maintenance of TOSHIBA RAID 
J.1  Outline of Maintenance (Repair) of TOSHIBA RAID 
Follow the below procedures to repair TOSHIBA RAID  
 
 
 
 
 
 
 
 
 
 
 
 
 
Reception 
Is the RAID configured  
by two HDD?(*1) 
Identify the failed HDD (*2) 
Yes 
Perform the HDD Trouble-
shooting Procedure in  
Section 2.6. 
No 
Treatment 
Is it needed to 
specify the cause? 
Analysis by Drive Log (*3) 
Yes
No 
Figure J-1  Flowchart of repairing TOSHIBA RAID 
*1: Refer to “Check of RAID configuration” in Section 3.2 in Chapter 3. 
*2: Refer to “Identifying failed HDD” in Section 3.3.3 of Chapter 3. 
*3: Refer to “Analysis by Drive Log” in section J.2.  
 
QOSMIO G30  Maintenance Manual (960-546)  [CONFIDENTIAL]  J-1