4.25 Wireless communication switch 4 Replacement Procedures
4.25 Wireless communication switch
Removing the Wireless communication switch
The following describes the procedure for removing the wireless communication switch (See
Figure 4-36).
1. Remove the wireless communication switch from the base assembly by pushing it
from the back.
Wireless communication switch
Figure 4-36 Removing the wireless communication switch
Installing the Wireless communication switch
The following describes the procedure for installing the wireless communication switch (See
Figure 4-36).
1. Install the wireless communication switch to the base assembly.
QOSMIO G30 Maintenance Manual (960-546) [CONFIDENTIAL] 4-59
To Next Page
Loading...
