3.31 SETUP 3 Tests and Diagnostics
QOSMIO G30 Maintenance Manual (960-546) [CONFIDENTIAL] 3-107
8. Drives I/O
This option displays the address and interrupts level for hard disk drive and optical
disk drive. It is for information only and cannot be changed.
Built-in HDD 1 Displays the setting of the HDD1 address.
This cannot be changed.
Built-in HDD
2 Displays the setting of the HDD2 address.
This cannot be changed.
CD-ROM Displays the setting of the drive address and interrupt
level. This cannot be changed.
9. PCI Bus
This option displays the interrupt level for the Card Bus in the computer. It is for
information only and cannot be changed.
PCI BUS = IRQ10, IRQ11
To Next Page
Loading...
Need help?
General