4 Replacement Procedures 4.8 Wireless LAN card
4-24 [CONFIDENTIAL] QOSMIO G30 Maintenance Manual (960-546)
Installing the wireless LAN card
The following describes the procedure for installing the wireless LAN card (See Figure 4-12).
1. Insert slantwise the wireless LAN card into the connector CN2600 on the system
board and press it to connect firmly.
2. Secure the wireless LAN card with the following screws.
• M2.0×4B BIND screw ×2
3. Connect the wireless LAN antenna cables to the terminals (White cable to MAIN,
Black cable to AUX) on the wireless LAN card.
4. Install the wireless LAN card hold plate and secure it with the following screw.
• M2.0×4B TORX screw ×1
To Next Page
Loading...
