Toshiba Qosmio G30 Maintenance Manual

4 Replacement Procedures 4.17 Optical disk drive
4-46 [CONFIDENTIAL] QOSMIO G30 Maintenance Manual (960-546)
Assembling the ODD assembly
The following describes the procedure for assembling the ODD assembly from the optical
disk drive (See Figure 4-27).
1. Install the ODD cover to the ODD base assembly by sliding the hook into the slot of
ODD base assembly.
2. Secure the ODD cover with the following screws.
• M1.8×2C S-THIN HEAD screw ×4

Toshiba Qosmio G30 Specifications

General

Brand	Toshiba
Model	Qosmio G30
Category	Laptop
Language	English