4.29 PC card slot 4 Replacement Procedures
QOSMIO G30 Maintenance Manual (960-546) [CONFIDENTIAL] 4-67
Installing the PC card slot
The following describes the procedure for installing the PC card slot (See Figure 4-42).
1. Insert the terminal of the PC card slot into the connector CN2110 on the system board.
2. Secure the PC card slot with the following screws.
• M2.0×3S S-THIN HEAD screw ×2
• M2.0×8S BIND screw ×2
To Next Page
Loading...
Need help?
General