4 Replacement Procedures 4.35 Hinge
4-80 [CONFIDENTIAL] QOSMIO G30 Maintenance Manual (960-546)
Installing the hinge
The following describes the procedure for installing the hinge (See Figure 4-51).
1. Install the hinge (R) to the cover assembly and secure it with the following screw.
• M2.5×6S Tapping screw ×1
2. Turn up the insulator and install the hinge (L) to the cover assembly and secure it
with the following screw.
• M2.5×6S Tapping screw ×1
To Next Page
Loading...
