20
EN
Guide to Display Information
The Display Menu gives you information on the
playback status of the HDD or DVD.
Display Example:
Press [DISPLAY] once to show the information on the
current operation mode.
Press [DISPLAY] one more time to see more
information, and to call up the icons for the available
features.
Press [DISPLAY] once.
Press [DISPLAY] twice.
Each section includes the information as listed below:
1 Device mode
2 • Current title number / total number of the titles
• Current chapter number / total number of the
chapters
• Elapsed playback time of the current title / total
time of the title
3 • Playback status
• Name of the current title
4 Playback status icon
5 Icons for the available features:
Note
• This is an example screen only for explanation.
Displayed items varies depending on the actual
mode.
• The information will not appear under the following
conditions;
- When there is no title recorded in the HDD/DVD.
- During recording (DVD only).
Guide to Setup Menu
This unit uses the following on-screen menu for most
operations. It allows you to change the settings of the
unit to match the environment, and to customise the
settings as you prefer.
“Easy Setting Menu” and “Advanced Menu” are
available.
“Easy Setting Menu” consists of those frequently
needed.
You can make all required settings using “Advanced
Menu.”
How to use Setup Menus:
Press [SETUP] to display “Easy Setting Menu” or
“Advanced Menu.” Choose either menu using
[Cursor
U / D], then press [ENTER].
• CD Menu is available only when a CD is loaded.
Example: Advanced Menu
Select a menu using [Cursor
U / D], then press
[ENTER].
Select an item to set using [Cursor
U / D], then
press [ENTER].
Sub menu or option window will appear.
Make your desirable selection using
[Cursor
U / D / L / P], then press [ENTER].
DVD MODE
8 / 8 1 / 4 0:00:04/ 1:30:00
DVD Play AAA
TC
4
2
1
3
5
DVD MODE
8 / 8 1 / 4 0:00:04/ 1:30:00
?
NR
SEARCH
TC
: SEARCH
: AUDIO
: SUBTITLE
: ANGLE
: REPEAT
: ZOOM
: NOISE REDUCTION
Available menus vary among discs.
DVD Recording Format
DVD Menu
HDD Menu
Initial Setup
Timer Program
CD
Easy Setting Menu
Advanced Menu
Clock Setting
Channel Setting
Playback
Record
Display
Reset to factory default
CD
DVD Menu
HDD Menu
Initial Setup
Timer Program
Easy Setting Menu
Advanced Menu
DVD Menu