Introduction Connections Basic Setup Playback
Editing
VCR Functions Others
Function Setup
Recording
21
EN
Front Panel Display Guide
1 TIME SHIFT
Appears during the Time Shift Playback (HDD).
2 Title / Track and Chapter mark
: Appears when indicating a title / track
number.
: Appears when indicating a chapter
number.
3 Current status of the unit
: Appears when Timer Recording is in
Standby, or is proceeding.
Disappears when all the Timer
Recordings are finished.
(Does not appear while in the Satellite
Link standby mode or the Satellite Link
Recording is in progress.)
: Appears when a videotape is in the unit.
DB : Lights up during a dubbing process.
4
I VCR : Lights up during VCR recording.
I HDD : Lights up during HDD recording.
I DVD : Lights up during DVD recording.
5 Disc type and current status of the unit
CD
: Appears when an Audio CD or a disc with
MP3 / JPEG / DivX
®
files is on the disc tray.
R : Appears when a DVD-R disc is loaded on
the disc tray.
RW : Appears when a DVD-RW disc is loaded on
the disc tray.
6 Displays the following
• Played-back time
• Current title / chapter / track number
• Recording time
•Clock
• Channel number
• VCR tape counter
• Remaining time for a One-touch Timer
Recording
Display Messages
Appears when the
unit is turning on.
Appears when the
disc tray is opening.
Appears when the
disc tray is closing.
Appears when the
unit is turning off.
Appears when a
disc is loaded on
the disc tray.
TIME
SHIFT
DB
VCR
HDD
DVD
CD R W
3
4
5
1
2
6
E439BBD_EN.book Page 21 Wednesday, May 31, 2006 4:01 PM
To Next Page
Loading...
