92
EN
Troubleshooting
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper performance.
General Operation
Discs
Others
Error message Cause & Solution
• The operation is not available.
Now Recording.
• The operation is not available during recording.
Now Dubbing.
• The operation is not available during dubbing.
Timer program starts soon.
• The operation is not available since a Timer Recording will start soon.
Error message Cause & Solution
• Invalid disc is inserted. Please insert a disc supported by this unit.
(See pages 29 and 51.)
Please eject the disc.
Playback is not authorized in your region.
• A disc with the invalid region code is inserted. This unit only supports the discs
with region code 2 or ALL.
Please insert a valid disc.
• No disc or an invalid disc is inserted. Please insert a disc supported by this
unit. (See pages 29 and 51.)
Cannot format.
• The discs not supported by this unit cannot be formatted.
Please use the discs supported by this unit. (See page 29.)
• During HDD playback or recording, formatting will not be executed.
Stop the playback or recording.
Cannot finalise.
• The discs not supported by this unit cannot be finalised. Please use the discs
supported by this unit. (See page 29.)
Un-finalise cannot be performed.
• The finalisation of the Video mode DVD discs made on other unit cannot be
undone.
Disc protect cannot be performed.
• Disc Protect is only available with the VR mode DVD-RW discs.
Other discs cannot be protected. (See page 49.)
Error
Error
Error
Disc Error
Region Error
Error
Error
Error
Error
Error
E439BBD_EN.book Page 92 Wednesday, May 31, 2006 4:01 PM
To Next Page
Loading...
Need help?
General
