EasyManua.ls Logo

Toshiba RD-XV45KB - Basic Recording

Toshiba RD-XV45KB
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction Connections Basic Setup Playback
Editing
VCR Functions Others
Function Setup
Recording
35
EN
One-touch Timer Recording
(OTR)
This is a simple way to set the recording time in
blocks of 30 minutes.
If you are recording to the HDD, press [HDD] first.
If you are recording to a disc, press [DVD] first.
Preparing for OTR:
Check that the recording media has enough
recordable space for the time you set.
If you are recording to a DVD, insert a
recordable disc.
Use only the HDD or CPRM-compatible VR
mode DVD-RW discs for recording copy-once
programmes. (See page 30.)
1 Turn on the TV. Select the
appropriate external input channel.
(See pages 22 to 23.)
2 Select a Rec Mode using
[REC MODE].
Refer to “Rec Mode” on page 29.
You can check the current Rec Mode by
pressing [REC MONITOR].
3 Select a desired channel to record
using [PROG.
/ ] or
[the Number Buttons].
4 Press [REC / OTR I] (HDD / DVD).
Recording will start.
5 Press [REC / OTR I] (HDD / DVD)
repeatedly to change the recording
time.
The recording time will be extended by 30
minutes every time you press [REC / OTR I]
(HDD / DVD).
The maximum recording time is 8 hours.
With HDD / DVD OTR, the recording time that
exceeds the remaining time of the recording
media will not be displayed.
To change the recording time during
the One-touch Timer Recording, press
[REC / OTR I] (HDD / DVD) repeatedly.
6 When OTR ends, the unit will turn off
automatically except under
conditions listed below.
- If a Timer Recording is programmed to start in 5
minutes.
- During playback of HDD / DVD / VCR.
- During recording of HDD / DVD / VCR.
- While displaying menus or information on the
screen.
To cancel the OTR in progress, press
[STOP S].
Note
The remaining recording time will be displayed on
the Front Panel Display during a One-touch Timer
Recording. Press [DISPLAY] to see it on the TV
screen.
You cannot pause a One-touch Timer Recording.
The unit will turn off automatically under the
following conditions.
- When a power failure occurs.
If you want to monitor the programme that you are
recording, make sure the device such as a Satellite
Box is turned off when it is connected to AV2.
HDDHDD
DVD-RWDVD-RW
VR
DVD-RWDVD-RW
Video
DVD-RDVD-R
I
HDD Rec 0:06:50 P08
65:56
LP
HDD MODE
I
HDD Rec 0:06:50 P08
HDD MODE
OTR (0:30)
65:56LP
0:30
8:00 7:30
1:00
(Normal Recording)
E439BBD_EN.book Page 35 Wednesday, May 31, 2006 4:01 PM

Table of Contents

Related product manuals