Introduction Connections Basic Setup Playback
Editing
VCR Functions Others
Function Setup
Recording
59
EN
PBC function for Video CDs
This unit conforms to ver.1.1 and ver.2.0 of the Video
CD standard playback control (PBC) function. This
enables you to play back interactive software using
menu screens. Refer to the information
accompanying the Video CD.
Ver.1.1 (without PBC function): You can still enjoy
playback of pictures and music from the CD.
Ver.2.0 (with PBC function): “Pbc” will appear on the
front panel display when playing back a Video CD
with the PBC function.
Hint
• When playing back Video CDs with the PBC
function, “Pbc” is displayed instead of the playing
back time and current track indications on the front
panel display.
Note
• Some operations cannot be performed unless the
function is cancelled either automatically or
intentionally by you.
• Operations that are not available when the PBC
function is set to “On” are indicated by the following
symbol in this manual:
Playing back a Video CD using the
menu
1 When playing back a Video CD with
the PBC function, the menu will
appear automatically.
2 Press [the Number buttons] to select
the desired track.
Playback will start at the selected track.
3 Press [RETURN] to go back to the
menu.
Note
• While the Display appears, you cannot perform
steps 2 and 3.
Cancelling and Recalling the PBC
function
Insert a Video CD.
1 In stop mode, press [SETUP].
“Easy Setting Menu” or “Advanced Menu” will
appear.
2 Select “CD” using [Cursor U / D],
then press [ENTER].
3 Select “PBC” using [Cursor U / D],
then press [ENTER].
PBC Menu will appear.
4 Select “Off” using [Cursor L / P],
then press [ENTER].
5 Press [SETUP] to exit.
To recall the PBC function, select “On” at step 4
above.
Note
• The default setting of “PBC” is “On.”
VCDVCD
VCD
To Next Page
Loading...
