Introduction Connections Basic Setup Playback
Editing
VCR Functions Others
Function Setup
Recording
37
EN
• If the starting time and the end time are the same, it
will be recognised as 24 hours recording.
• If the starting time you entered is already in the past,
the recording will start as soon as you activate the
Timer Recording by pressing [ENTER] at step 4.
Editing the Timer Programming
information
1 Press [TIMER PROG.].
Timer Programming List will appear.
2 Select the programme you want to
edit using [Cursor
U / D], then press
[ENTER].
Editing Menu will appear.
3 To change the setting of a
programme:
1 Select “Program Change” using
[Cursor
U / D], then press [ENTER].
Timer Programming Window will appear.
2 Move to the item you want to change using
[Cursor
L / P], then press [Cursor U / D] to
change the setting.
To edit a title name:
1 Select “Edit Title Name” using [Cursor
U / D],
then press [ENTER].
Editing window will appear.
2 By following the steps in “Guide to Edit Title
Name” on page 73, edit the title name. When
you finish entering the title name, press
[PLAY P]. Or select “Decide” using
[Cursor
U / D / L / P], then press [ENTER].
To delete a programme from the list:
1 Select “Delete” using [Cursor
U / D], then
press [ENTER].
Confirmation window will appear.
You can access this screen by pressing [CLEAR]
instead of [ENTER] at step 2.
2 If you want to delete the title, select “Yes” using
[Cursor
L / P].
4 Press [TIMER PROG.] to exit.
Note
• As to the Timer Programme in progress (which is
shown in red in the Timer Programming List), you
only can edit the end time. The changes made
during recording will be recognised as only specific
to that recording in progress and it will not affect the
daily or the weekly recording setting.
PDC (Programme Delivery Control)
Programme Delivery Control (PDC) assures that the
TV programmes you have programmed for timer
recording are recorded exactly from beginning to end,
even if the actual broadcasting time differs from the
scheduled time due to a delayed start or extension of
the programme duration. Furthermore, if a
programme is interrupted, the recording will also be
interrupted automatically and resumed when the
programme starts again.
If the PDC signal drops out because the broadcast
signal is weak, or if a broadcasting station does not
transmit a regular PDC signal, the timer recording is
performed in normal mode (without PDC) even if it
was programmed for PDC. If the starting time of the
PDC timer recording is between 0:00 and 3:59 on a
given day, the PDC function will operate from 20:00
on the previous day to 4:00 on the next day. If the
starting time of the PDC timer recording is between
4:00 and 23:59 on a given day, the PDC function will
operate from 0:00 on the given day to 4:00 on the
next day. This means that if the relevant programme
is broadcasted within this period, it is recorded
correctly. If the timer is not programmed correctly, the
incorrect timer setting stays in effect unless you
cancel it. To cancel an incorrect timer setting, refer to
“Editing the Timer Programming information” on the
left.
TIMER PROGRAMMING
1 / 1
Wed 20 / 12 23:30 1:00HDD SP
PDCMode
Sun 31/12 19:00 20:00 P12 HDD OffSP
Sun 31/12 19:30 20:30 P10 HDD OffSP
Sun 31/12 20:30 21:00 P08 HDD OffSP
Date
Start
End CH
HDD/DVD
Delete
Edit Title Name
Program Change
31/12
19:00 20:00
0:39HDD SP
Mode PDC
P12 HDD OffSP
Date
Start
End
CH
HDD/DVD
Sun
B
C
D
E
G
H
I
JF
L
M
N
OK
Q
R
S
TP
V
W
X
YU
Z
2
3
4
51
"
#
$
%
!
,
-
.
/
+
@
[
]
^
?
7
8
9
0
6
'
(
)
*
&
;
<
=
>
:
{
|
}
~
_
v
w
x
y
u
z
q
r
s
t
p
l
m
n o
k
g
h
i
j
f
b
c
d
e
a
A
TIMER PROGRAMMING
Space
To Next Page
Loading...
