Voice Processing
Mailbox Editor Screens
Strata CIX Voice Mail Programming 01/07 4-15
Voice Processing
Enable Copies all new messages to the destination mailbox.
Possible values:
On: Copies all new messages to another mailbox.
Off: (Default) Does not copy new messages to another mailbox.
Destination Mailbox that receives a copy of this mailbox’s messages.
Possible values: blank, valid mailbox
Default: blank (Message Copy is Off)
Active (From/To) Time frame, expressed in military time, when the copy request is active.
Possible values: 00:00~23:59
Default: 00:00~23:00
Delay Length of time voice mail delays after the normal message arrives at this mailbox
before copying the message to the destination mailbox.
Possible values: 0~999 (minutes)
Default: 0
New Urgent Message
Enable Copies an urgent message to the destination mailbox.
Possible values:
On: Copies urgent message to another mailbox.
Off: (Default) Does not copy a urgent message to another mailbox.
Destination Mailbox that receives a copy of this mailbox’s urgent messages.
Note Messages can be copied more than once. System parameter sys_hub_count
determines how many times a message can be copied.
Possible values: blank, valid mailbox
Default: blank (Message Copy is Off)
Active (From/To) Time frame, expressed in military time, when the copy request is active.
Possible values: 00:00~23:59
Default: 00:00~23:00
Delay Length of time voice mail delays after the urgent message arrives at this mailbox
before copying the message to the destination mailbox.
Possible values: 0~999 (seconds)
Default: 0
Table 4-2 User Mode Tab Screen Fields (continued)
FIELD DESCRIPTION
To Next Page
Loading...
