Toshiba STRATA CIX - Speed Dial

Voice Mail Configuration
Parameters
3-30 Strata CIX Voice Mail Programming 01/07
Modify Parameters
1. From the eManager Main menu, click Advanced Configuration > Systems > VM Parameters.
The Parameters screen displays (see Figure 3-11).
2. Locate the parameter in the list using the scroll bar.
3. Place your cursor in the field and modify the parameter (see “Methods for Modifying the
Parameters” on page 3-29).
4. Click Submit. Your changes are saved and the screen remains open. A dialog box displays.
5. Click OK. The changes are added to the voice mail database the next time voice mail service is
shutdown and restarted.
Add Parameters
1. From the Parameters screen (see Figure 3-11), right click anywhere in the Parameter Names or
Va lue s fields. A pop-up box displays with the words “Add” and “Remove.”
2. Click Add. The Add a System Parameter screen displays.
3. Type the new parameter’s name and its appropriate value.
Note The required prefix “sys” is automatically added by the system.
4. Click OK. The parameter is saved and displays alphabetically in the parameter list on the
screen.
...or Cancel. The parameter is not saved and the dialog box closes.
Delete Parameters
1. From the Parameters screen (see Figure 3-11), right click anywhere in the Parameter Names or
Va lue s fields. A pop-up box displays with the words “Add” and “Remove.”
2. Click Remove. The Delete the System Parameter screen displays.
3. Click OK. The parameter is deleted and is removed from the list on the screen.
...or Cancel. The parameter is not deleted and the dialog box closes.