Voice Processing
Direct Send Fax
Strata CIX Voice Mail Programming 01/07 4-51
Voice Processing
Direct Send Fax
Note The Fax feature group is not currently supported.
The Direct Send Fax User Agent is used to enable callers to send a fax directly to a voice mail user’s
mailbox without first ringing the user’s phone.
Create/Modify Direct Send Fax User Agent
1. From the eManager, click Advanced Configuration > Voice Mail > Direct Send Fax. The Direct
Send Fax screen displays.
2. Click Create. A pop-up box displays.
3. Type a single User Agent number (e.g., 881), a range of numbers (e.g., 800-804) or a
combination of both separated by commas (e.g., 800-802, 881, 888).
Note The number you enter must be unique. If the number already exists, the Stratagy ES
software indicates that the User Agent could not be created.
4. Click OK. The Creating dialog box displays while the program creates the User Agents. When
the process is complete, the screen indicates whether the creation of the User Agent(s) was
successful.
5. Click Exit. The new user agent is added to the UA ID list on the right of the screen.
6. Highlight the new user agent in the
list. The screen displays a new
entry screen with the new user
agent number in the UA Number
field (shown right).
7. Type the Group number to which
the User Agent belongs. See
“Chains/Groups/Fax” on page 4-31
for instructions on creating group
numbers. Field defaults to 1.
8. Type an identifying name in the
Name 1/2 fields.
9. Type a comment in the Comment field.
10.Click Submit. The data is saved.
7339
To Next Page
Loading...
