Voice Mail
Configuration
Voice Mail Configuration
Parameters
Strata CIX Voice Mail Programming 01/07 3-29
Methods for Modifying the Parameters
To modify a parameter, you must double-click the parameter’s corresponding Values field.
Depending upon the parameter, the Stratagy ES places a cursor at the end of the line, or displays a
drop-down list or a dialog box.
Cursor in Field
A parameter that has many valid
values can be changed by placing
your cursor in the field. Typeover
the current value/information in
the field. Be sure to check Table
3-11 for the parameter’s valid
entries.
Drop-down List
A parameter that has set values
(e.g., true, false) can be changed
using the drop-down list
provided for the field. Select one
of the values in the list by
clicking on the value.
Dialog Box
Double-clicking on a parameter
field with element values (e.g.,
prompt file, etc.), produces a
dialog box for editing as well as
selection of the value.
Using the Dialog box, you can
select, add, delete or reposition
the value in the list (move up/
down).
Important! If you are deleting
an element value
from the box, make sure the correct value is highlighted before clicking Delete. You
are not asked to confirm the deletion.
7630
7631
7632
To Next Page
Loading...
