Voice Mail Configuration
Voice Ports
3-14 Strata CIX Voice Mail Programming 01/07
Voice Ports
The Voice Ports screen (see Figure 3-4, Table 3-4) enables you to assign the Answer Method and a
telephone system’s extension number for each voice mail voice port.
Important! When configuring voice ports, you must enter the data in the following order:
Telephone Systems, Answer Methods, and Voice Ports. See “Configure Voice Ports”
on page 3-2.
Figure 3-4 Voice Ports Screen with Sample Data
Table 3-4 Voice Ports Screen Fields
FIELD DESCRIPTION
Port (Display only) Displays actual port numbers based on voice card(s) installed.
Extension Specific telephone system’s extension or terminal number (e.g., Centrex application
= 0001). Voice mail uses this value for SMDI integration.
Important! Be careful when making your entry in this field. The voice mail system
does not validate your input.
Answer Method Indicates integration group connected, greeting mailbox, and number of rings
needed to answer calls. Defaults to Default_Name.
Notification Groups (Display only) Port assignment in a Notification Group. Voice mail obtains this value
from the information assigned in the Notification Groups Tab screen (see
“Notification Groups” on page 3-18).
Statistical Groups (Display only) Port assignment in a Statistical Group. Voice mail obtains this value
from the information assigned in Statistical Groups Tab screen (see “Port Statistics”
on page 3-20).
7287
To Next Page
Loading...
Need help?
General