Unified Messaging (UM)
Server Installation
7-8 Strata CIX Voice Mail Programming 01/07
sys_smtpserver_maxconn
Defines the maximum number of connections allowed to this voice mail
SMTP server by client applications. If set to zero, then the server is not
available to the client.
UM client seats are fixed to mailboxes. This value can be used to limit net
work traffic, if necessary.
Default: 10
sys_smtpserver_types2accept
Defines MIME types that this voice mail server accepts as voice messages.
Note There is no validation for this field.
Default: audio/x-wav audio/wav audio/microsoft-wave
sys_um_directory suffix
Enables UM users to effectively use the same address (name) for both the
SES mailbox addresses and the e-mail address. Text value to be appended
to the From field when sending Unified Messaging e-mails.
Default: None
sys_um_subject_fax_only
Appears in Subject field on Message inbox to identify the type of message
received.
Note This parameter is not currently supported.
Default: Stratagy Fax Message
sys_um_subject_voice_only
Appears in Subject field on Message inbox to identify the type of message
received.
Default: Stratagy Voice Message
sys_um_subject_voicefax
Appears in Subject field on Message inbox to identify the type of message
received.
Note This parameter is not currently supported.
Default: Stratagy Voice and Fax Message
sys_um_unknown_name
Configures a name for unknown senders in SES.
Example: Anonymous, unspecified
Note Some anti-spam filters do not pass on e-mail from ambiguous sources.
Check with your e-mail administrator for acceptable entries.
Default: unknown
Table 7-1 System Parameter Definitions (continued)
Parameter Description
To Next Page
Loading...
Need help?
General