Token Programming
Defined Tokens
11-22 Strata CIX Voice Mail Programming 01/07
[( )
Read %S variables state–reads the values of all twenty %S variables (%S0~%S19) from the
specified file. The format expected is a one line, comma delimited, ASCII file where the first value is
%S0, the second is %S1, etc.
When the [( ) token is used with the ]( ) token, you can read, modify, and write (remember) %S
variables.
Notes
• Use two backslashes \\ to signify one backslash \. For example, to specify the file name
C:\Stratagy ES\NEW.TXT, use C:\\Stratagy ES\\NEW.TXT.
• To avoid potential simultaneous access errors: within the same mailbox, if you read with the [( )
token, write with the ]( ) token.
Syntax [(file)
where:
file ASCII file with columns separated by commas (comma delimited). Valid DOS file name. Can
be a variable.
]( )
Write %S variables state–writes the values of all twenty %S variables (%S0~%S19) to the specified
file. Typically, you would use this with the [( ) token which reads the %S variables.
Notes
• Use two backslashes \\ to signify one backslash \. For example, to specify the file name
C:\Stratagy ES\NEW.TXT, use C:\\Stratagy ES\\NEW.TXT.
• To avoid potential simultaneous access errors: within the same mailbox, if you read with the [( )
token, write with the ]( ) token.
Syntax ](file)
where:
file ASCII file with columns separated by commas (comma delimited). Valid DOS file name. Can
be a variable.
^( )
Change port volume–changes the volume of the current port to the specified level.
Notes
© The Stratagy ES system configuration parameter gain_norm sets the starting volume of all the
ports (Chapter 3 — Voice Mail Configuration).
© For the user, the current port volume can be set through the Mailbox Editor Menu User Mode
Options Tab screen’s Playback Volume field and by the user with the Play Message Controls
(Chapter 4 — Voice Processing).
Syntax (n)
where:
n Volume of current port
(range: -8~8). -8 is the softest
0 is the default initial volume
8 is the loudest.
Table 11-3 Defined Tokens (continued)
Token Description
To Next Page
Loading...
