Voice Mail Configuration
Parameters
Strata CIX Voice Mail Programming 01/07 3-43
Voice Mail
Configuration
sys_smtpserver_gateway Configures a dedicated SMTP Gateway server for SES UM to use. This
gateway can be running on the SES or another server in the network. Enter
the Gateway server’s Name or IP Address and Port Number.
Name;9875
Note The server name and the port number should be separated with a
blank, a comma, or a semicolon.
Default: blank
sys_smtpserver_host Stratagy ES hosts its own internal SMTP server in order to support the UM
feature. SMTP servers require host names to identify them in an SMTP
transmission. This parameter defines the host name for the Stratagy ES
SMTP server.
The host name is used as a part of the source address of an UM message
sent to an e-mail server. For example, if the sys_smtpserver_host parameter
is set to “stratagyes,” then an UM message from mailbox 200 would have a
source address of “200@stratagyes”.
In most cases using the computer name of the Stratagy ES server is
sufficient. However, Toshiba recommends that you confirm the appropriate
host name for the Stratagy ES SMTP server with your site System
Administrator.
Default: blank
sys_smtpserver_maxconn Defines the maximum number of connections allowed to this voice mail
SMTP server by client applications. If set to zero, then the server is not
available to the client.
UM client seats are fixed to mailboxes. This value can be used to limit net
work traffic, if necessary.
Default: 10
sys_smtpserver_types2accept Defines MIME types that this voice mail server accepts as voice messages.
Note There is no validation for this field.
Default: audio/x-wav audio/wav audio/microsoft-wave
sys_sofkey_length Sets softkey template ID length. Set this value to 3 if sofkeys are multilingual.
Possible values:
2 (set for Strata CTX Release 1.02 and earlier) (default)
3 (set for Strata CTX Release 1.03 or later)
sys_speakname_dir Defines the directory where the prompts are located for the Notification
Applications (e.g., MsgLampOn, MsgLampOff). Prompts play when the user
changes his/her message notification in the Change User Options menu.
Possible values: Any valid path/filename.
Default: C:/StratagyES/Prompts
sys_startup_apps Default: Snmp SOFTKEYNOTIFYDialogModuleInit
sys_statistics_interval Defines the time interval in milliseconds that the information page gets
updated.
Possible values: number of milliseconds
Default: 30000 (ms)
Table 3-12 Parameter Definitions (continued)
Parameter Description
To Next Page
Loading...
