Voice Mail Configuration
Parameters
3-46 Strata CIX Voice Mail Programming 01/07
sys_um_directory suffix Text value to be appended to the From field when sending Unified
Messaging e-mails.
Default: None
sys_um_subject_fax_only Appears in Subject field on Message inbox to identify the type of message
received.
Note This parameter is not currently supported.
Default: Stratagy Fax Message
sys_um_subject_voice_only Appears in Subject field on Message inbox to identify the type of message
received.
Default: Stratagy Voice Message
sys_um_subject_voicefax Appears in Subject field on Message inbox to identify the type of message
received.
Note This parameter is not currently supported.
Default: Stratagy Voice Message
sys_um_unknown_name Configures a name for unknown senders in SES.
Anonymous, unspecified
Note Some anti-spam filters do not pass on e-mail from ambiguous
sources. Check with your e-mail administrator for acceptable entries.
Default: unknown
sys_voicehome_num_rings Set number of rings before Voice Home application hangs up to call.
Default: 4
sys_voicemail_pilot_number Defines the hunt group pilot for the voice mail ports. This parameter is used
in FeatureFlex scripts to direct calls to VM ports.
Default: blank
sys_vpim_enabled Voice Profile for Internet Mail (VPIM) is an industry standard protocol that
facilitates server-to-server message exchange between voice processing
systems from different manufacturers. VPIM can exchange both voice
messages as long as they are of the format dictated by the VPIM standard.
Possible values: 0 disabled (default), 1 (enabled)
Table 3-12 Parameter Definitions (continued)
Parameter Description
To Next Page
Loading...
Need help?
General