TP-Link T2600G-28TS - Profile Binding

153
9.1.7 Profile Binding
When the switch receives IGMP report message, it examines the profile ID bound to the access
port to determine if the port can join the multicast group. If the multicast IP is not filtered, the switch
will add the port to the forward port list of the multicast group. Otherwise, the switch will drop the
IGMP report message. In that way, you can control the multicast groups that users can access.
Choose the menu Multicast→IGMP Snooping→Profile Binding to load the following page.
Figure 9-11 Profile Binding
The following entries are displayed on this screen:

Profile and Max Group Binding
UNIT:1/LAGS: Click 1 to configure the physical ports. Click LAGS
to configure the
link aggregation groups.
Select: Select the desired entry for configuration.
Port: It is multi-optional. Displays the port number.
Profile ID: The existing Profile ID bound to the selected port.
Max Group: The maximum multicast group a port can join.