TP-Link T2600G-28TS - Binding Table

200
Choose the menu Routing→DHCP Server→Manual Binding to load the following page.
Figure 10-18 Manual Binding
The following entries are displayed on this screen:

Manual Binding
Pool Name: Select the IP Pool containing the IP address to be bound.
IP Address: Specify the IP address to be bound.
Binding Mode: Select the binding mode of the manual binding.
Client ID: Specify the identifier of the client.
Hardware Address: Specify the hardware address to be bound.
Hardware Type: Select the hardware protocol of the client.

Manual Binding Table
Displays the list of the configured binding entries of IP addresses and hardware addresses.
10.4.4 Binding Table
In this page, you can view the information about the clients attached to the Server.
Choose the menu Routing→DHCP Server→Binding Table to load the following page.
Figure 10-19 DHCP Server Binding Table

DHCP Server Binding Table
ID: Displays the ID of the client.
IP Address: Displays the IP address
that the Switch has allocated to the
client.
Client ID / Hardware
Address:
Displays the MAC address of the client.