TP-Link T2600G-28TS - Policy Create; Action Create

237
S-Mirror: Displays the source mirror port of the policy.
S-Condition: Displays the source condition added to the policy.
Redirect: Displays the redirect added to the policy.
QoS Remark: Displays the QoS remark added to the policy.
Operation: Edit the information of this action.
12.3.2 Policy Create
On this page you can create the policy.
Choose the menu ACL→Policy Config→Policy Create to load the following page.
Figure 12-12 Create Policy
The following entries are displayed on this screen:

Create Policy
Policy Name: Enter the name of the policy.
12.3.3 Action Create
On this page you can add ACLs for the policy.
Choose the menu ACL→Policy Config→Action Create to load the following page.
Figure 12-13 Action Create
The following entries are displayed on this screen:

Create Action