TP-Link T2600G-28TS - Neighbor Info

318
Port ID
：
Indicates the specific identifier for the port in local device.
TTL:
Indicates the number of seconds that the recipient LLDP agent
is to regard the information associated with this chassis ID and
port ID identifier to be valid.
Port Description
：
Displays local port's description.
System Name
：
Indicates local device's administratively assigned name.
System Description
：
Displays local device's system description.
System Capabilities
Supported
：
Displays the supported function of the local device.
System Capabilities
Enabled
：
Displays the primary function of the local device.
Management
Address
：
Displays the particular management address associated with
local device.
15.2.2 Neighbor Info
On this page you can get the information of the neighbors.
Choose the menu LLDP→Device Info→Neighbor Info to load the following page.
Figure 15-4 Neighbor Information
The following entries are displayed on this screen:

Auto Refresh
Auto Refresh: Enable/Disable the auto refresh function.
Refresh Rate: Configure the auto refresh rate.

Neighbor(s) Info
Select the desired port to display the information of the corresponding port.