TP-Link T2600G-28TS - 13.2 IPv6-MAC Binding

251
Choose the menu Network Security→IP-MAC Binding→ARP Scanning to load the following
page.
Figure 13-4 ARP Scanning
The following entries are displayed on this screen:

Scanning Option
Start IP Address:
Specify the Start IP Address.
End IP
Address: Specify the End IP Address.
VLAN ID:
Enter the VLAN ID.
Scan:
Click the Scan button to scan the Hosts in the LAN.

Scanning Result
Select:
Select the desired entry to be deleted or bound. It is
multi-optional.
Host Name:
Displays the Host Name here.
IP Address:
Displays the IP Address of the Host.
MAC Address:
Displays the MAC Address of the Host.
VLAN ID:
Displays the VLAN ID here.
Port:
Displays the number of port connected to the Host.
Protect Type:
Displays the Protect Type of the entry.
Source:
Displays the source of the entry.
Collision:
Displays the Collision status of the entry.
• Warning:
Indicates that the collision may be caused by the
MSTP function.
• Critical:
Indicates that the entry has a collision with the
other entries.
13.2 IPv6-MAC Binding
The IPv6-MAC Binding function allows you to bind the IPv6 address, MAC address, VLAN ID and
the connected Port number of the Host together. Basing on the IPv6-MAC binding table, ND