TP-Link T2600G-28TS - Port Enable; VLAN Mapping

83
6.7.2 Port Enable
On this page, you can enable the port for the VLAN Mapping function. Only the port is enabled,
can the configured VLAN Mapping function take effect.
Figure 6-13 Enable Port for VLAN Mapping

VPN Port Enable
UNIT:
Click 1 to configure the physical ports. Click LAGS
to configure the
link aggregation groups.
Select your desired port for VLAN Mapping function. All the ports are disabled for VLAN Mapping
function by default.
6.7.3 VLAN Mapping
VLAN Mapping function defines a new VLAN TAG to be inserted before the VLAN TAG of the
packets according to the VLAN Mapping entries. And these packets can be forwarded in the new
VLAN. If VLAN VPN function is enabled, a received packet already carrying a VLAN tag will be
tagged basing on the VLAN Mapping entries and becomes a double-tagged packet to be
forwarded in the new VLAN.