TP-Link T2600G-28TS - MAC Notification

60
VLAN ID
: Displays the corresponding VLAN ID.
Port
: Here the symbol “--” indicates no specified port.
Type
: Displays the type of the MAC address.
Aging Status
: Displays the aging status of the MAC address.
Note:
The MAC address in the Filtering Address Table cannot be added to the Static Address Table or
bound to a port dynamically.
5.4.5 MAC Notification
The MAC notification function is used to monitor the status of the MAC address table, and the
MAC address learned on each port.
Choose the menu Switching→MAC Address→MAC Notification to load the following page.
The following entries are displayed on this screen:

MAC Notification Global Config
Global Status
: Enable/Disable the MAC notification globally.
Table Full
Notification
:
Enable/Disable the sending of a MAC Full Notification when the M
AC
address table is full.
Notification
Interval:
S
pecify the interval time between notifications. It ranges from 1 to
1000 seconds and the default interval is 1 second.