272
Choose the menu Network Security→ND Detection→ND Detection to load the following page.
Figure 13-22 ND Detection
Detection: Enable/Disable the ND Detection function.
Enter the VLAN ID in which you want to enable/
VLAN Configuration
Display:
Display the VLANs with ND detection function enabled.
Select the desired unit or LAG for configuration.
: Select Enable/Disable the port to be a Trusted
Port. Only the
Trusted Port can forward the Router Advertisement Message
and Router Redirect Message from Routers.
13.7 IP Source Guard
IP Source Guard is to filter the IP packets based on the IP-MAC Binding entries. Only the packets
matched to the IP-MAC Binding rules can be processed, which can enhance the bandwidth utility.
To Next Page
Loading...
