286
13.11.1 Global Config
This page is used to enable/disable the AAA function globally.
Choose the menu Network Security→AAA→Global Conifg to load the following page.
Figure 13-31 AAA Global Config
Configuration Procedure
Click Enable to enable the AAA function globally.
13.11.2 Privilege Elevation
This page is used to elevate the current logged-in user from guest to admin and gain administrator
level privileges. The authentication password is possibly authenticated in RADIUS/TACACS+
servers, user-defined server groups or local on the switch.
Choose the menu Network Security→AAA→Global Conifg to load the following page.
Figure 13-32 Privilege Elevate
Configuration Procedure
Enter the Enable Password and click Enable button to elevate the current logged-in user from
guest to admin. Only admin users can configure the following AAA settings.
Tips:
If the Enable password is verified locally, the Enable password should be previously set by the
admin users using the command lines. For more details please refer to the command enable
password in the Command Line Interface Guide on the resource CD.
13.11.3 RADIUS Server Config
This page is used to configure the authentication servers running the RADIUS security protocols.
To Next Page
Loading...
