TP-Link T2600G-28TS - Routing Table; Ipv4 Routing Table; Ipv6 Routing Table

188
Admin Status: Displays the Admin status. Choose Disable
to disable the
interface's Layer 3 capabilities.
Interface Name: Displays the name of the interface.

Interface Setting Detail Information
Displays the detailed setting information of the interface.
10.2 Routing Table
This page displays the routing information summary generated by different routing protocols.
10.2.1 IPv4 Routing Table
Choose the menu Routing→Routing Table→IPv4 Routing Table to load the following page.
Figure 10-7 Routing Table
The following entries are displayed on this screen:

Routing Information Summary
10.2.2 IPv6 Routing Table
Choose the menu Routing→Routing Table→IPv6 Routing Table to load the following page.
Figure 10-8 IPv6 Routing Table
Protocol
Displays the protocol of the route.
Destination/Mask:
Displays the destination and subnet of the route.
Next Hop: Displays the IP address to which the packet should be sent next.
Distance: Displays the management distance of the ro
ute. The smaller the
distance, the higher the priority.
Metric: Displays the metric of the route.
Interface name: Displays the description of the egress interface.