TP-Link T2600G-28TS - Page 76

64
their destination MAC address as 01000CCCCCCC, which
includes CDP, VTP, PAgP and UDLD.
• 01000CCCCCCD:
Enable protocol tunneling for the PVST+
packets.
• ALL: All the above Layer 2 protocols are supported for tunneling.
Threshold
Configure the threshold for packets-per-
second accepted for
encapsulation. Packets beyond the threshold will be dropped. If no
protocol is specified,
the threshold applies to each Layer 2 protocol
types.
LAG:
Displays the port‘s aggregation group.
Return to CONTENTS