119
NKL003
2. Inspect the gear teeth for nicks, cracks, chips, or
signs of wear. If any are present, the gear must be
replaced.
B. Intermediate Shaft
1. Inspect the bearing for free and smooth turning. If
the bearing does not turn freely, it must be replaced.
NKL004
2. Inspect the gear teeth for nicks, cracks, chips, or
signs of wear. If any are present, the gear must be
replaced.
NKL005
3. Inspect the shaft gear teeth for nicks, cracks, chips,
or signs of wear. If any are present, the shaft must be
replaced.
C. Shift Shaft Rail
1. Inspect the shift forks for nicks, cracks, chips, or
signs of wear. If any are present, the forks must be
replaced.
NKL012
2. Inspect the rail for nicks, cracks, chips, or signs of
wear. If any are present, the rail must be replaced.
D. Shift Shaft
1. Inspect the gear for nicks, cracks, chips, or signs of
wear. If any are present, the gear must be replaced.
NKL033
2. Check for leaking around bell crank and shift shaft.
Remove nut (A) and use a puller to separate bell
crank (B) and splined end of shift shaft.
NKL042
To Next Page
Loading...
