Transcend MP710 - Driver Installation; OS-Specific Driver Setup

69
Driver Installation︱
Driver Installation for Windows
®
XP, Vista, 7 and 8
No drivers are required. These Windows
®
Operating Systems have built-in drivers to support the MP710.
Plug your MP710 into an available USB port and Windows
®
will install the necessary files. A “Removable
Disk” drive (for the MP710 internal memory) with a newly assigned drive letter will appear in the My
Computer window.
Driver Installation for Mac
®
OS X 10.0, or Later
No drivers are required. Plug your MP710 into an available USB port and your computer will automatically
detect it.
Driver Installation for Linux
®
Kernel 2.4, or Later
No drivers are required. Plug your MP710 into a USB port and mount it.
1. Create a directory for the MP710.
Example: mkdir /mnt /MP710
2. Mount the MP710.
Example: mount –a –t msdos /dev/sda1 /mnt /MP710
NEVER use Windows to format your MP710.