TRENDnet TL2-G244 - Snmp Community; Snmp Engineid

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
17-3
Command Modes Global Configuration Mode
User Guidelines Before configuring the access settings, the SNMP group has to be created first.
Example
switch(config)# snmp access oper v2c read operv2readview write
operv2writeview notify operv2notifyview nonvolatile
Command History Version History
1.00.001
This command was introduced
snmp community
To create a SNMP community, and the no form removes the community.
Command
snmp community
<CommunityName>
security
<SecurityName>
[{volatile | nonvolatile}]
no snmp community
<CommunityName>
Syntax Description
CommunityName SNMP community name
security
SecurityName Security name
volatile
Store in volatile memory
nonvolatile
Store in nonvolatile memory
Default Settings
Community Index : NETMAN
Community Name : NETMAN
Security Name : none
Storage Type : Non-volatile
------------------------------
Community Index : PUBLIC
Community Name : PUBLIC
Security Name : none
Storage Type : Non-volatile
Command Modes
Global Configuration Mode
Example
switch(config)# snmp community oper security none nonvolatile
Command History
Version History
1.00.001
This command was introduced
snmp engineid
To configure the SNMP engine identifier of the switch