TRENDnet TL2-G244 - Port Security Settings

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
6-26
Port Security Settings
This page is to configure the port security function for each port.
Figure 66 – Layer2 Management > Static MAC Entries > Port Security Settings
Parameter
Description
Select
Select a port to apply the configuration changes.
Port
Port ID.
Admin State
To enable or disable the port security function. Default is disable.
Max Learning Address
(0-64)
Specify the maximum MAC address number of this port.
Click Apply to submit the changes.
Click 1-12, 13-24 to configure port security function for corresponding ports.