TRENDnet TL2-G244 - Duplex; Flowcontrol

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
25-3
User Guidelines The configured port speed and duplex settings only takes effect when
auto-negotiation disabled.
Example switch(config-if)#
speed 100
Command History Version History
1.00.001
This command was introduced
duplex
To set the port duplex mode.
Command
duplex { full | half }
Syntax Description
full
Port runs at full duplex mode.
half
Port runs at half duplex mode.
Default Settings
Full
Command Modes
Interface Configuration Mode
Example
switch(config-if)# duplex half
Command History
Version History
1.00.001
This command was introduced
flowcontrol
To enable/disable 802.3x flow control on ports.
Command
flowcontrol { on | off }
Syntax Description
on
Enable flow control.
off
Disable flow control.
Default Settings
Off
Command Modes Interface Configuration Mode
Example switch(config-if)#
flowcontrol on