TRENDnet TL2-G244 - Static VLAN Configuration; Dynamic Vlan; Dynamic VLAN Global Configuration

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
6-6
Acceptable Frame
Types
To configure the acceptable frame type of a port.
All: Accepts all kinds of frames.
Tagged: Accepts only tagged frames
UnTagged and Priority Tagged: Accepts only untagged frames and frames
with priority tag.
Default is All.
Ingress Filtering To enable/disable the filter of ingress packets not with the same VLAN tag as
the VLAN membership of the port. Default is Enabled.
In the left-hand Select column, check all of the ports modified and click Apply to submit the changes.
Static VLAN Configuration
This page is to set up the static VLAN configuration.
Figure 34 – Layer2 Management > VLAN > Static VLANs
Parameter
Description
VLAN ID
Specify the VLAN ID to be created.
VLAN Name
Specify the name of VLAN.
Member Ports
Specify the ports to apply the VLAN membership.
Untagged Ports
Specify the ports to be untagged interfaces.
Forbidden Ports
Specify the ports to be forbidden interfaces.
Click Apply to submit the changes and the Reset button will clear the information. Click Delete will remove an
existed VLAN.
Note
There has to be at least one VLAN in the system.
Dynamic VLAN
Dynamic VLAN Global Configuration
This page is to set the global dynamic VLAN configuration.