TRENDnet TL2-G244 - Chapter 39 Storm Control Command; Storm Control Command List; Storm-Control Pkt-Type

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
39-1
Chapter 39
Storm Control Command
Storm Control Command List

storm-control pkt-type
storm-control pkt-type
To enable and configure the details of the storm control function.
Command
storm-control pkt-type { broadcast-only | multicast-broadcast
| dlf-multicast-broadcast } rate-level <rate-level
(64-1024000)>
no storm-control
Syntax Description
broadcast-only
Only controls the broadcast packets.
multicast-broadcast
Controls both broadcast and multicast packets.
dlf-multicast-broadcast
Controls broadcast, multicast and Destination
Lookup Failed (DLF) unicast packets.
rate-level
rate-level(64-1024000)
Specify the packet number all types above is
allowed to be forwarded per second.
Default Settings
Disable
Command Modes
Global Configuration Mode
User Guidelines
The no form disables the storm control.
Example
switch(config)# storm-control broadcast level 500
Command History
Version
History
1.00.001
This command was introduced