TRENDnet TL2-G244 - Port Control

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
6-3
Figure 30 – Layer2 Management > Port Manager > Port Monitoring
Parameter
Description
Status To enable/disable the port monitoring session on the device. Default is
disabled.
Monitoring Port
Specify the source port of the mirror session.
Port
Specify the destination port of the mirror session.
Receive Monitoring
Monitoring the traffic received from the source port.
Transmit Monitoring
Monitoring the traffic transmitted from the source port.
Click Apply to submit the changes.
Port Control
This page is to configure the control parameters of interface.