TRENDnet TL2-G244 - Show Http Server Status; Show Ip Information

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
12-9
Command History Version History
1.00.001
This command was introduced.
show http server status
To display the HTTP server status.
Command
show http server status
Command Modes
Privileged EXEC mode
Example
switch#
show http server status
HTTP server status : Enabled
HTTP port is : 80
Command History
Version History
1.00.001
This command was introduced.
show ip information
To display the IP information.
Command
show ip information
Command Modes
Privileged EXEC mode
Example switch#
show http server status
HTTP server status : Enabled
HTTP port is : 80
switch# show ip information
Global IP Configuration:
------------------------
IP routing is enabled
Default TTL is 64
ICMP redirects are always sent
ICMP unreachables are always sent
ICMP echo replies are always sent
ICMP mask replies are always sent
Number of aggregate routes is 10
Number of multi-paths is 2
Load sharing is disabled
Path MTU discovery is disabled
Command History Version History
1.00.001 This command was introduced.