TRENDnet TL2-G244 - LA Port Settings

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
6-16
Figure 50 – Layer2 Management > LA > Port Channel Settings
Parameter
Description
Port Channel ID
Select a configured port channel group to submit the changes.
Action Type
To add or delete ports from/to a port channel. Select Add to add ports, Delete
to delete one.
Mode Specify the mode of this port channel. Possible options are Lacp and Manual.
Default is Lacp
Ports
Specify which port to be included in this port channel.
MAC Selection
Specify the MAC address of the port channel. Select Dynamic to let system
assign the MAC address to the port channel automatically, or select Manual
to use a manual configured MAC address.
Force MAC
Specify the manual configured MAC address of this port channel.
Click Apply to submit the configurations, Reset to clear the value.
LA Port Settings
This page is to configure port related link aggregation settings.
Figure 51 – Layer2 Management > LA > Port Settings
Parameter
Description