TRENDnet TL2-G244 - Default Ip Address Allocation Protocol

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
12-4
Command
default ip address
<ip-address>
[ subnet-mask
<subnet mask>
]
[ interface <interface-type> <interface-id> ]
Syntax Description ip-address IP address of the default interface
subnet-mask
subnet mask
Subnet mask of the default interface
interface
interface-type
interface-id
Interface-type including Fa (Fast Ethernet) or Gi (Gigabit
Ethernet).
Interface-id is slot/port number.
Default Settings IP address - 192.168.10.200
Subnet mask - 255.255.255.0
Command Modes
Global Configuration Mode
User Guidelines This command is to configure the IP address and subnet mask of default
interface.
Example switch(config)#
default ip address 10.0.0.250 subnet-mask
255.0.0.0
Command History
Version
History
1.00.001
This command was introduced.
default ip address allocation protocol
To configure the protocol that the IP address of default interface is assigned.
Command
default ip address allocation protocol {bootp | rarp | dhcp}
Syntax Description
bootp
Bootp protocol
rarp
RARP protocol
dhcp
DHCP protocol
Default Settings
DHCP
Command Modes
Global Configuration Mode
User Guidelines
This command is to configure the protocol that the IP address of default interface
is assigned.
Example
switch(config)# default ip address allocation protocol bootp
Command History
Version History
1.00.001
This command was introduced.